Small Outline Package >NAME >VALUE Dual In Line Package >NAME >VALUE HP-VFQFP-N20 Micro Lead Frame package (MLF) >NAME >VALUE RESISTOR >NAME >VALUE RESISTOR wave soldering >NAME >VALUE >NAME >VALUE 1 >NAME >VALUE PIN HEADER >NAME >VALUE 1 >NAME >VALUE 1 >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE CAPACITOR >NAME >VALUE >NAME >VALUE >NAME >NAME >VALUE >NAME >VALUE MISO SCK RST VCC MOSI GND USB >NAME >VALUE non-polarized capacitor >NAME >VALUE >NAME >VALUE (Black) (Green) Resistor (US Symbol) Variants with postfix FAB are widened to allow the routing of internal traces CHIP SC-59 L×W : 2.9mm×1.5mm (TO-236mod/SC-59) >VALUE >NAME CHIP SC-70 L×W : 2.0mm×1.25mm (SOT-323/SC-70) >VALUE >NAME CHIP POWER SC-62 L×W : 4.6mm×2.5mm (SOT-89/SC-62) >VALUE >NAME POWER TO-220 L×W×H : 10.0mm×4.8mm×15.5mm grid 2.54mm vertical (TO-220AB/SC-46) >VALUE >NAME 1 2 3 POWER TO-3 L×W×H : 40mm×26mm×9mm >NAME >VALUE 1 2 3 4 POWER TO-3P L×W×H : 16.0mm×4.8mm×20.0mm grid 5.45mm vertical (TO-3P/SC-65) 1 2 3 >VALUE >NAME SMALL SIGNAL TO-92 L×W×H : 4.8mm×3.8mm×5.0mm grid 2.54mm vertical (TO-92/SC-43) >VALUE >NAME 1 2 3 SMALL SIGNAL/POWER TO-92L L×W×H : 4.8mm×3.8mm×8.0mm grid 2.54mm vertical (TO-92mod/SC-51) >VALUE >NAME 1 2 3 >VALUE >NAME FIELD EFFECT TRANSISTOR (Unipolar transistor) MOS FET (Enhancement) N channel type Japanese symbol Hewlett Packard LED Displays <author>Created by librarian@cadsoft.de</author> LED 2 mm horizontal, RM 2.54 mm >NAME >VALUE LED 2 mm horizontal, RM 2.54 mm >NAME >VALUE LED 2mm horizontal Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Piher Potentiometers PC-16/16 mm carbon types <author>Created by librarian@cadsoft.de</author> POTENTIOMETER single carbon potentiometer, 16 mm >NAME >VALUE >NAME POTENTIOMETER single carbon potentiometer, 16 mm >NAME >VALUE POTENTIOMETER single carbon potentiometer, 16 mm, S3ROH Since Version 8.2, EAGLE supports online libraries. The ids of those online libraries will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports URNs for individual library assets (packages, symbols, and devices). The URNs of those assets will not be understood (or retained) with this version. Since Version 8.3, EAGLE supports the association of 3D packages with devices in libraries, schematics, and board files. Those 3D packages will not be understood (or retained) with this version.